Gradient Domain Texture Processing (Version 4.60)

--in <input mesh and texture names>: These two strings specify the the names of the mesh and the texture image.
The input mesh is assumed to be in PLY format, giving the set of vertices with the x-, y-, and z-coordinates of the positions encoded by the properties x, y, and z the set of polygons encoded by two lists. The first gives the indices of the vertices in the polygon (integers). The second gives the texture coordinates at each polygon corner (pairs of floats).
The input texture is assumed to be an image if the file extension is png, jpg, or jpeg, and a normal map if the extension is normap.
[--out <output texture>]: This string is the name of the file to which the processed texture will be written.
[--outVCycles <output v-cycles>]: This integer specifies the number of v-cycles to use if the processed texture is output to a file and a direct solver is not used. The default value for this parameter is 6.
[--interpolation <interpolation weight>]: This floating point values gives the interpolation weight.
The default value for this parameter is 1000.
[--modulation <gradient modulation>]: This floating point values gives the (uniform) gradient modulation.
The default value for this parameter is 1.
[--jitter <random seed>]: If specified, this integer value is used to seed the random number generation for jittering. (This is used to avoid singular situations when mesh vertices fall directly on edges in the texture grid. In such a situation, the executable will issue a warning "Zero row at index ...".)
[--useDirectSolver]: If enabled, this flag specifies that a direct solver should be used (instead of the default multigrid solver).

--in <input mesh and composite texture>: These two strings specify the names of the mesh and the texture image.
The input mesh is assumed to be in PLY format, giving the set of vertices with the x-, y-, and z-coordinates of the positions encoded by the properties x, y, and z the set of polygons encoded by two lists. The first gives the indices of the vertices in the polygon (integers). The second gives the texture coordinates at each polygon corner (pairs of floats).
The input texture is assumed to be an image in png, jpg, or jpeg format.
[--mask <input mask>]: This string specifies the name of the mask image.
The input mask is assumed to be an image in png, jpg, or jpeg format (though results may be unpredictable if it is encoded using lossy compression). Black pixels in the mask file should be used to denote regions where the texel value is unkown.
[--out <output texture>]: This string is the name of the file to which the stitched texture will be written.
[--outVCycles <output v-cycles>]: This integer specifies the number of v-cycles to use if the stitched texture is output to a file and a direct solver is not used.
The default value for this parameter is 6.
[--interpolation <interpolation weight>]: This floating point values gives the interpolation weight.
The default value for this parameter is 100.
[--dilateBounaries <dilation radius>]: This integer values gives the radius by which the boundaries of the segments should be dilated before stithing is performed.
The default value for this parameter is -1, indicating no dilation.
[--jitter <random seed>]: If specified, this integer value is used to seed the random number generation for jittering. (This is used to avoid singular situations when mesh vertices fall directly on edges in the texture grid. In such a situation, the executable will issue a warning "Zero row at index ...".)
[--useDirectSolver]: If enabled, this flag specifies that a direct solver should be used (instead of the default multigrid solver).
[--multi]: If enabled, this flag specifies that the second and third arguments to the --in parameter are to be interpreted as format specifiers for the textures confidence map files.
Note: If this flat is enabled, the input masks must be specified using the --mask parameter.

--in <input mesh name>: This string specifies the name of the mesh.
The input mesh is assumed to be in PLY format, giving the set of vertices with the x-, y-, and z-coordinates of the positions encoded by the properties x, y, and z the set of polygons encoded by two lists. The first gives the indices of the vertices in the polygon (integers). The second gives the texture coordinates at each polygon corner (pairs of floats).
[--inVF <vector-field file>]: This string specifies the file containing the vector-field for visualization. (If this parameter is not specified, the principal curvature direction is used.)
This file is assumed to be in binary, with the first four bytes storing an integer representing the number of vectors (this should be equal to the number of triangles in the mesh) followed by the list of vectors. The latter are encoded using double-precision floating point values and should be 8*num_triangles*dim bytes, with num_triangles the number of triangles/vectors and dim the dimension of vector-field. (The value of dim is equal to two if the --intrinsicVF is specified an three otherwise.)
[--intrinsicVF]: If enabled and a vector-field is specified, this flag indicates that the vector values are represented with two values per vector, using an intrinsic frame. Specifically, for triangle ( v₀ , v₁ , v₂ ), the two-dimensional coefficients ( x , y ) correspond to the three-dimensional tangent vector ( x·(v₁-v₀) , y·(v₂-v₀) ).
[--out <output texture>]: This string is the name of the file to which the line-integral-convolution texture will be written.
[--outVCycles <output v-cycles>]: This integer specifies the number of v-cycles to use if the processed texture is output to a file and a direct solver is not used. The default value for this parameter is 10.
[--licInterpolation <line-integral-convolution interpolation weight>]: This floating point values gives the interpolation weight used for the line-integral-convolution.
The default value for this parameter is 10000.
[--sharpInterpolation <sharpening interpolation weight>]: This floating point values gives the interpolation weight used for sharpening the line-integral-convolution results.
The default value for this parameter is 10000.
[--modulation <sharpening gradient modulation>]: This floating point values gives the gradient modulation used for sharpening the line-integral-convolution results.
The default value for this parameter is 100.
[--width <output texture width>]: This integers specifies the width of the output texture. The default value for this parameter is 2048.
[--height <output texture height>]: This integers specifies the height of the output texture. The default value for this parameter is 2048.
[--jitter <random seed>]: If specified, this integer value is used to seed the random number generation for jittering. (This is used to avoid singular situations when mesh vertices fall directly on edges in the texture grid. In such a situation, the executable will issue a warning "Zero row at index ...".)
[--minor]: If enabled, this flag specifies that the directions of minimal principal curvature should be used to define the vector-field (instead of the default maximal principal curvature directions).
[--useDirectSolver]: If enabled, this flag specifies that a direct solver should be used (instead of the default multigrid solver).

--in <input mesh name>: This string specifies the the name of the mesh.
The input mesh is assumed to be in PLY format, giving the set of vertices with the x-, y-, and z-coordinates of the positions encoded by the properties x, y, and z the set of polygons encoded by two lists. The first gives the indices of the vertices in the polygon (integers). The second gives the texture coordinates at each polygon corner (pairs of floats).
[--interpolation <diffusion interpolation weight>]: This floating point values gives the interpolation weight used for diffusing the initial delta function.
The default value for this parameter is 10000.
[--width <output texture width>]: This integers specifies the width of the output texture. The default value for this parameter is 1024.
[--height <output texture height>]: This integers specifies the height of the output texture. The default value for this parameter is 1024.
[--jitter <random seed>]: If specified, this integer value is used to seed the random number generation for jittering. (This is used to avoid singular situations when mesh vertices fall directly on edges in the texture grid. In such a situation, the executable will issue a warning "Zero row at index ...".)
[--useDirectSolver]: If enabled, this flag specifies that a direct solver should be used (instead of the default multigrid solver).

--in <input mesh name>: This string specifies the the name of the mesh.
The input mesh is assumed to be in PLY format, giving the set of vertices with the x-, y-, and z-coordinates of the positions encoded by the properties x, y, and z the set of polygons encoded by two lists. The first gives the indices of the vertices in the polygon (integers). The second gives the texture coordinates at each polygon corner (pairs of floats).
[--out <output texture>]: This string is the name of the file to which the reaction-diffusion texture will be written.
[--outSteps <output reaction-diffusion steps>]: This integer specifies the number of reaction-diffusion steps to be taken. The default value for this parameter is 1000.
[--width <output texture width>]: This integers specifies the width of the output texture. The default value for this parameter is 512.
[--height <output texture height>]: This integers specifies the height of the output texture. The default value for this parameter is 512.
[--jitter <random seed>]: If specified, this integer value is used to seed the random number generation for jittering. (This is used to avoid singular situations when mesh vertices fall directly on edges in the texture grid. In such a situation, the executable will issue a warning "Zero row at index ...".)
[--useDirectSolver]: If enabled, this flag specifies that a direct solver should be used (instead of the default multigrid solver).
[--dots]: If enabled, this flag specifies that the feed/kill parameters for dot-formation should be used. Otherwise, the feed/kill parameters for stripes are used.

USAGE EXAMPLES (WITH SAMPLE DATA)
For testing purposes, a number of textured mapped models are provided (using the .ply extension). Of these, David and Julius include normal maps (using the .normap extension), Fertility includes the eight harmonic vector-fields (using the .vf extension), and Rooster uses (partial) texture maps as well as a mask image and confidence maps.

TextureFiltering

To run this executable you must specify the input mesh as well as the texture itself:

% Bin/*/TextureFiltering --in ../TSP.Data/David/david.ply ../TSP.Data/David/david.normap

This opens a viewer allowing the user to prescribe both global gradient modulation weights (through the slider) and local modulation weights (through a paint-brush interface, by depressing the [SHIFT] key and dragging with the left mouse button to smooth and the right mouse button to sharpen).
You can also bypass the viewer and output a globally sharpened/smoothed texture to a file:

% Bin/*/TextureFiltering --in ../TSP.Data/Julius/julius.ply ../TSP.Data/Julius/julius.normap --out julius.smooth.normap --modulation 0 --interpolation 100

Here a modulation weight less than 1 indicates that gradients should be dampened (resulting in smoothing) and a small interpolation weight reduces the interpolation penalty, exaggerating the smoothing.

TextureStitching

This viewer can be run in one of two modes:

In addition to the input mesh, specify a (single) composite texture and mask. If adjacent texels share the same mask color, they are assumed to come from the same source, and the gradient between them is preserved. Otherwise, the gradient is set to zero. Additionally, a mask color of black is reserved to indicate that the texel value is unknown.
For example, running
% Bin/*/TextureFiltering --in Rooster/rooster.ply ../TSP.Data/Rooster/texels.png --mask ../TSP.Data/Rooster/mask.png
opens a viewer showing the stitched texture on the left and the composite texture on the right.
In addition to the input mesh, specify (multiple) partial textures and associated confidence maps. The code blends the gradients in regions of overlap, with weights determined by the mask. Texel and confidence file names are specified using integer format specifiers, with zero-indexing. Colors are transformed to scalar confidence values by computing the gray-scale value and normalizing to the range [0,1].
For example, running
% Bin/*/TextureFiltering --in Rooster/rooster.ply ../TSP.Data/Rooster/texels-%02d.png --mask ../TSP.Data/Rooster/mask-%02d.png --multi
opens a viewer showing the stitched texture on the left and the first partial textures on the right.
Pressing the 't' key toggles forward through the partial textures and pressing 'T' toggles backwards.
Holding [SHIFT] and clicking on the stitched model replaces the blended gradients under the paint-brush with the gradients from the currently visualized partial-texture.

You can also bypass the viewer and output the stitched texture to a file:

% Bin/*/TextureStitching --in Rooster/rooster.ply ../TSP.Data/Rooster/texels-%02d.png --mask ../TSP.Data/Rooster/mask-%02d.png --multi --out stitched.png

LineIntegralConvolution

To run this executable you must specify the input mesh:

% Bin/*/LineIntegralConvolution --in ../TSP.Data/Fertility/fertility.ply

This opens a viewer visualizing a vector-field by performing anisotropic diffusion to simulate line-integral-convolution. (To start the iterative solver, press the [SPACE] key.) By default, the vector-field used is defined by the (maximal) principal curvature directions.
You can also explicitly prescribe the vector-field:

% Bin/*/LineIntegralConvolution --in ../TSP.Data/Fertility/fertility.ply --inVF ../TSP.Data/Fertility/harmonic-001.vf --intrinsicVF

(The --intrinsicVF flag is required because the vector-field in the file is represented using two intrinsic coordinates per triangle instead of three extrinsic ones.)
You can also bypass the viewer and output the line-integral-convolution texture to a file:

% Bin/*/LineIntegralConvolution --in ../TSP.Data/Hand/hand.ply --minimal --out hand.minimal.jpg

Here a visualization of the minimal principal curvature directions is written out as a texture image.

Geodesics

To run this executable you must specify the input mesh:

% Bin/*/Geodesics --in ../TSP.Data/Bunny/bunny.ply

This opens a viewer allowing the user to prescribe the source of the geodesic by holding the [SHIFT] button and clicking on the source location with either mouse button.

ReactionDiffusion

To run this executable you must specify the input mesh:

% Bin/*/ReactionDiffusion --in ../TSP.Data/Camel/camel.ply

This opens a viewer visualizing the "stripes" reaction-diffusion process. (To start the process, press the [SPACE] key.)
You can also bypass the viewer and output the reaction-diffusion texture to a file:

% Bin/*/ReactionDiffusion --in ../TSP.Data/David/david.ply --out david.dots.jpg --dots --outSteps 2000

Here a "dots" pattern is written out to an image. (Empirically, we have found that this reaction-diffusion process takes more steps to converge, hence the larger number of steps.)

COMPILATION AND EXECUTION

The Windows executables require both the glew and glut dynamically linked libraries to run. These can be found here and should be included either in the directory with the executables, or in the directory from which the executables are run.
Compiling under Windows requires both the glew and glut libraries. These can be found here and should be placed in the output directory for linkage.